[CHINESE]
ȫվǴʹ˵

1ȫվǵ
   1ѡȷĴںţʹѡһµĲʣ
   2ϵġաȻϵ͡ߡ
   3ݽյԶѡӦʾʽ

2ݵȫվ
   1ѡȷĴںţʹѡһµĲʣ
   2򿪻ֱӱ༭Ҫ͵(ֵ)߱루ĸ֣ļ
   3Ͻ뵼棬ѡȷĵͣ
   4ϵ롿Ȼڴϵ͡

3
   áý棺
   1Ƕȵλжȷ롢GONMILģʽӰļʾ
   2뵥λסӢߡӢģʽӰļļʾ
   3˳򣺷ΪNEZENZ֣ıʾ˳
   4ϵ0.000.140.20ӰGTS-7ƽļ㣻
   5ӣΧ0.9-0.11ӰGTS-7ƽļ㡣

4ļ
   1򿪡ѡĿļļԶѡʾģʽвļıʽʾļʹļԱʽʾ
   2ִ֧򿪵ļУ
          ļ*.htf
          Ʋļ*.mea*.job*.dat
          ļ*.coo*.pts*.cor        
          CASSʽ֪ļ*.dat*.csv*.txt
          GTS-7ʽ֪ļ*.csv*.txt
          ļ*.txt
   3򿪲ֵ֧ļʽļʱʾ

5
   1棬ʾݵǰʾݴ洢 
   2ʾͺͱѡ
      ݣ
          ŷָļ*.csv*.txt
          CASSʽ֪ļ*.dat
          DXF֪ļ*.dxf
          GTS-7߽ǲļƽࣨ*.gt7
          GTS-7߽ǲļбࣨ*.gt7
          GTS-7вļ*.gt7
          GTS-7ʽ֪ļ*.txt          
          ļ*.htf
      ݣ
          CASSʽ֪ļ*.dat*.csv*.txt
          DXF֪ļ*.dxf
          GTS-7ʽ֪ļ*.txt
      ļ
          ļ*.txt

6·켣
	רҵ·׮ļ㹦ܡ
	ֽ֧㷨ԪԼµĵ·׮͸̵߳ļ㡣
	
7
CASSʽֶ    ţ룬X(E),Y(N),Z
GTS-7ʽֶ   ţX(E),Y(N),Z
ŷָļֶΣSTA,,,,X(E),Y(N),Z
                        SC,,Ŀ,,ƽ,߲,б,X(E),Y(N),Z
   
[ENGLISH]
PC Port II Instructions

1. Receive data from the total station
   1) Choose the right ComPort. Then choose the same BaudRate on the total station and PC Port II.
   2) Click "Receive" on the PC Port II and then Click "Send" or "Export" on the total station.
   3) The PC Port II will automatically choose the corresponding display mode to show the received data depending on the it's type.

2. Send data to the total station
   1) Choose the right ComPort. Then choose the same BaudRate on the total station and PC Port II.
   2) Edit coordinates file or codes files.
   3) Click "Send" on the PC Port II and then Click "Receive" or "Import" on the total station.

3. Setting
   Click "Setting" to enter setup interface.
   1) Angle Unit: Include DMS, GON and MIL. The angle unit will affect the display of the measured file.   2) Dist Unit:  Include Meter, US-Ft and INT-Ft.The distance unit will affect the display of the measured file and coordinate file.
   3) K Option: Include 0.00, 0.14 and 0.20. The K Option will affect the calculation of horizontal distance in the GTS-7 measured data.
   4) Grid Scale: Range 0.9 to 1.1. The Grid Scale will affect the calculation of horizontal distance in the GTS-7 measured data.
   5) Coord Order: Include NEZ and ENZ.This setting will change the coordinate's order of the coordinate display mode.

4. Open the file
   1) Click "open". Select the target file. The PC Port II will open the file and then automatically display the data according to the file content. The measured data display in the Memo, and the coordinate data and code data display in the Table.
   2) Open options.:
        Any File(*.*),
        CASS coordinate file(*.dat;*.csv;*.txt),
        Binary coordinate file(*.coo;*.pts;*.cor),
        Binary measured File(*.mea;*.job),
        GTS-7 coordinate file(*.csv;*.txt)|,
        TS job file(*.htf),
        Code file(*.txt).
   3) When the format of the file is unsupported or the file is damaged,  show the error message.

5. Save the data
   1) Click "save". If there is data in the display area, The PC Port II will choose the right save options to save the data according to the current data content.
   2) Data types and save options.
      Measured data:
        Comma separator measured file(*.csv),
        Comma separator measured file(*.txt),
        CASS coordinate file(*.dat),
        DXF coordinate file(*.dxf),
        GTS-7 measured file with HD(*.gt7),
        GTS-7 measured file with SD(*.gt7),
        GTS-7 measured file with all data(*.gt7),
        GTS-7 coordinate File(*.txt),
        TS job file(*. htf).
      Coordinate data: 
        CASS coordinate file(*.dat),
        DXF coordinate file(*.dxf),
        CASS coordinate file(*.txt),
        CASS coordinate file(*.csv),
        GTS-7 coordinate File(*.txt);
      Code data:
        Code file(*.txt),
        Any file(*.*).
    
6. Road Calculation
	Specialty road factor calculation.
	Support Intersection method and Main-Pile method. Also support slope calculation.
    
7. The others
CASS coordinate filept no,pt code,X(E),Y(N),Z
GTS-7 coordinate Filept no,X(E),Y(N),Z,pt code
Comma separator measured file
STA,pt no,IH,pt code,X(E),Y(N),Z
SC,pt no,TH,pt code,HA,VA,SD,X(E),Y(N),Z


[PORTUGUESE]
Instrucoes do PC-Port II

A. Recebendo os dados da estacao total
1) Escolha a PortaCom correta. Em seguida, escolha a mesma Taxa de Transf da estacao total e do PC-Port II.
2) Clique em "Receber" no PC-Port II e depois em "Enviar" ou "Exportar" na estacao total.
3) O PC-Port II escolhera automaticamente o modo de exibicao correspondente para mostrar os dados recebidos.
-----------------------------------------------------------------------------------
B. Enviar dados para a estacao total
1) Escolha a PortCom correta. Em seguida, escolha a mesma Taxa de Transf da estacao total e do PC-Port II.
2) Edite arquivos de coordenadas ou arquivos de codigos.
3) Clique em "Enviar" no PC-Port II e, em seguida, clique em "Receber" ou "Importar" na estacao total.
-----------------------------------------------------------------------------------
C. Configuracao
Clique em "Configurar" para entrar na interface de configuracao.
1) Unidade de angulo: Inclui DMS, GON e MIL. A unidade angular afetara a exibicao do arquivo de medicao.
2) Unidade de distancia: Inclui Metros, Pes-US e Pes-Int. A unidade de distancia afetara a exibicao do arquivo de medicao e do arquivo de coordenadas.
3) Fator K: Inclui 0,00, 0,14 e 0,20. O Fator K afetara o calculo da distancia horizontal nos dados de medicao no GTS-7.
4) Escala de grade: Intervalo de 0,9 a 1,1. A Escala de Grade afetara o calculo da distancia horizontal nos dados de medicao no GTS-7.
5) Ordem Coord: Inclui NEZ e ENZ. Esta configuracao alterara a ordem das coordenadas do modo de exibicao de coordenadas.
-----------------------------------------------------------------------------------
D. Abrindo o arquivo
1) Clique em "Abrir". Selecione o arquivo de destino. O PC-Port II abrira o arquivo e exibira automaticamente os dados de acordo com o conteudo do arquivo.
2) Opcoes de extensao de dados:
Qualquer arquivo (*. *),
Arquivo de coordenadas CASS (*. Dat; *. Csv; *. Txt),
Arquivo de coordenadas binarias (*. Coo; *. Pts; *. Cor),
Arquivo de medicao binario (*. Mea; *. Job),
Arquivo de coordenadas GTS-7 (*. Csv; *. Txt) |,
Arquivo de trabalho TS (*. Htf),
Arquivo de codigo (* .txt).
3) Quando o formato do arquivo nao for suportado ou o arquivo estiver danificado aparecera uma a mensagem de erro.
-----------------------------------------------------------------------------------
E. Salvando os dados
1) Clique em "Salvar". Se houver dados na area de exibicao, o PC-Port II escolhera as opcoes de salvamento corretas para salvar os dados de acordo com o seu conteudo.
2) Tipos de dados para salvar:
Dados de medicao:
- Arquivo de separador de virgulas (*. Csv),
- Arquivo de medicao separador de virgulas (*. Txt),
- Arquivo de coordenadas CASS (*. Dat),
- Arquivo de coordenadas DXF (*. Dxf),
- Arquivo de medicao GTS-7 com HD (*. Gt7),
- Arquivo de medicao GTS-7 com SD (*. Gt7),
- Arquivo de medicao GTS-7 com todos os dados (*. Gt7),
- Arquivo de coordenadas GTS-7 (*. Txt),
- Arquivo de trabalho TS (*. Htf).
Dados de coordenardas:
- Arquivo de coordenadas CASS (*. Dat),
- Arquivo de coordenadas DXF (*. Dxf),
- Arquivo de coordenadas CASS (*. Txt),
- Arquivo de coordenadas CASS (*. Csv),
- Arquivo de coordenadas GTS-7 (*. Txt);
Dados de codigo:
- Arquivo de codigo (*. Txt),
- Qualquer arquivo (*. *).
-----------------------------------------------------------------------------------
F. Calculo de Vias
Calculo especial do fator rodoviario.
Suporta o Metodo de Interseccao e o Metodo Pilha Principal. Tambem suporta o calculo da inclinacao.
-----------------------------------------------------------------------------------
G. Os outros
Arquivo de coordenadas CASS (N.pt, codigo pt, X (E), Y (N), Z)
Arquivo de coordenadas GTS-7 (N.pt, X (E), Y (N), Z, codigo pt)
Arquivo de medicao separado por virgulas
STA, N.pt, IH, codigo pt, X (E), Y (N), Z
SC, N.pt, TH, codigo pt, HA, VA, SD, X (E), Y (N), Z